DashCam
The Road Never Forgets.
Dual 1080p cameras, 4G connectivity and GPS + Beidou positioning.
A connected dash camera for commercial vehicles, from Inurum.
Scroll
The Road Never Forgets.
Dual 1080p cameras, 4G connectivity and GPS + Beidou positioning.
A connected dash camera for commercial vehicles, from Inurum.
Why Dash Cam Exists
Vehicles on the road face incidents every day. Dash Cam records the road ahead and the driver cabin with sound, and a super capacitor helps keep video files intact if power is cut suddenly.
Built-in 4G, GPS + Beidou positioning and support for the JT/T808 and CMSV6 protocols let the camera report to a fleet platform, so a manager can preview video, track the vehicle and talk to the driver.
Accepts 10 V to 36 V DC, so it works on both 12 V and 24 V vehicles, and is rated for -25 °C to +70 °C. Starts recording in under 10 seconds.
A dash camera for fleets: two cameras, 4G, GPS and a one-key SOS button in one unit.— Inurum Technologies
Core Capabilities
Six core capabilities in one 2-channel 4G dash camera.
Records two 1080p channels at 25 fps with sound: a built-in front camera plus one external camera for the cabin or rear. Video is encoded with H.265 or H.264 to save storage space and mobile data when streaming.
A 950 MHz ARM Cortex-A7 dual-core processor with a 1.0 TOPS NPU neural network acceleration engine and 1 Gb of DDR memory handles video encoding and the camera's on-board functions.
Built-in 4G module (TDD-LTE and FDD-LTE) with a micro SIM slot supports global frequency bands. It talks to fleet platforms over JT/T808-2011, JT/T808-2019 and CMSV6, and can create a WiFi hotspot (with the external USB WiFi module).
Dual-mode GPS and Beidou positioning gives the platform the vehicle's location. A built-in 3-axis accelerometer (G-sensor) senses motion and vibration, and vibration can wake the camera from low-power standby.
Records to one TF (microSD) card of up to 512 GB. A special file system improves read and write efficiency for more stable recording, and a super capacitor protects the integrity of video files if the vehicle power is cut abnormally.
A one-key SOS button sends an emergency alarm to the platform. The built-in speaker and microphone allow two-way voice intercom between the camera and the platform. One low-level output channel can drive an external alarm.
Two 1080p channels with sound: a built-in front camera and one external camera, recorded by a single 4G-connected unit.
Remote Access
Preview video and change settings from the mobile app or client software, wake the camera remotely from the platform, and upgrade it over the air.
Illustration
Illustration (darkened)
← Drag to compare →
Preview video and configure parameters from the mobile app or from client software.
In low-power standby the camera can stay online with the platform, and can be woken remotely from the platform or the app, or by vibration.
Firmware can be upgraded over the air or from a TF card, so deployed units can be updated without removing them.
One RS232 channel is reserved for communicating with external peripherals.
Inside The Machine
Eight core components of the 2-channel 4G dash camera.
ARM Cortex-A7 dual-core at 950 MHz with a 1.0 TOPS NPU, encoding two 1080p channels with H.265 or H.264.
Two 1080p CMOS cameras: one built into the unit and one external. Both record with sound at 25 fps.
TDD-LTE and FDD-LTE module with a micro SIM slot, supporting global frequency bands.
Dual-mode GPS and Beidou module for vehicle positioning.
One TF (microSD) card slot, supporting cards up to 512 GB.
Built-in microphone and speaker (G.711a audio) for in-cabin recording and voice intercom with the platform.
Built-in 3-axis accelerometer that senses motion and vibration.
Keeps power for a short time after an abnormal power cut so video files are saved intact.
Where it is used
Accepts 10 V to 36 V DC, so it fits 12 V and 24 V trucks. Dual-channel recording covers the road ahead and a second view from the external camera.
Rated for -25 °C to +70 °C and 20% to 80% relative humidity.
The external camera can be pointed at the cabin, and the built-in microphone records sound. Voice intercom lets the platform speak to the driver.
In low-power standby the camera can stay online with the platform. Vibration or a remote command from the platform or app wakes it.
Reports to fleet platforms using the JT/T808-2011, JT/T808-2019 and CMSV6 protocols.
Starts up within 10 seconds of power-on.
GPS + Beidou positioning reports the vehicle location to the platform.
One RS232 channel connects external peripherals; one low-level output drives an alarm.
Fleet Features
Six functions that help a fleet manager stay in touch with the vehicle and the driver.
Connects to JT/T808-2011, JT/T808-2019 and CMSV6 platforms over 4G, so the camera fits into existing fleet software.
A one-key SOS button sends an emergency alarm to the platform.
In low-power standby the camera can stay online and report to the platform, and wakes on vibration or a remote command.
Built-in speaker and microphone allow two-way voice between the dash camera and the platform.
A super capacitor keeps the camera powered long enough to save video files properly if vehicle power is cut abnormally.
Firmware can be upgraded over the air (OTA) or from a TF card.
Mobile App and Client
Use the mobile app or client software to preview video and set camera parameters.
Preview the camera view from the mobile app or client software.
Set camera parameters from the mobile app or client software.
The camera reports GPS + Beidou position to the fleet platform.
Video and alarms are delivered to platforms that use the JT/T808 or CMSV6 protocols.
Technical Specifications
Comparison
How a connected 2-channel dash camera compares with a typical basic recorder.
| Feature | Dash Cam | Typical Basic Dash Cam |
|---|---|---|
| Cameras | 2 channels (front + external) | Usually 1 channel |
| Video | 1080p per channel, H.265 / H.264 | Varies |
| Connectivity | 4G LTE, WiFi hotspot | Usually none |
| Positioning | GPS + Beidou | Often optional |
| Platform Protocols | JT/T808-2011, JT/T808-2019, CMSV6 | Usually none |
| Emergency Alarm | One-key SOS button | Usually none |
| Voice Intercom | Two-way with the platform | Usually none |
| Power-Loss Protection | Super capacitor | Varies |
| Remote Wake-up | Platform, app or vibration | Usually none |
| Input Voltage | 10 V to 36 V DC (12 V and 24 V) | Often 5 V or 12 V only |
| Operating Temperature | -25 °C to +70 °C | Varies |
| Startup Time | Within 10 seconds | Varies |
| Firmware Upgrade | OTA or TF card | Often card only |
FAQ
A regular dash camera records to a memory card. Dash Cam adds two camera channels, 4G connectivity, GPS + Beidou positioning, a one-key SOS button, voice intercom and support for the JT/T808 and CMSV6 fleet platform protocols.
Recording to the TF card is local. Remote preview, location reporting, voice intercom and over-the-air upgrades need a 4G connection with a SIM card in the micro SIM slot.
Yes. It supports a low-power online function that keeps it connected to the platform, remote wake-up from the platform or app, and wake-up on vibration. Contact us for how this is wired for your vehicle.
One TF (microSD) card slot, up to 512 GB. We recommend high-endurance cards made for continuous recording.
10 V to 36 V DC, so it works on 12 V and 24 V vehicles. Power use is under 5 W in normal working state without external equipment.
The working temperature range is -25 °C to +70 °C, at 20% to 80% relative humidity.
Two channels: one built-in front camera and one external camera. Each records 1080p at 25 fps with sound.
Yes. It has a built-in microphone and speaker (G.711a audio), which also provide two-way voice intercom with the platform.
Over the air (OTA) or from a TF card.
It supports the JT/T808-2011, JT/T808-2019 and CMSV6 protocols. Contact us if you need another protocol.
One RS232 channel for external peripherals, one SOS input, one low-level alarm output, a micro SIM slot and a TF card slot. WiFi hotspot mode uses an external USB WiFi module.
Inurum provides embedded hardware and firmware engineering for fleet camera projects. Tell us your requirement and we will reply.
Use the WhatsApp or contact buttons on this page and we will share pricing and availability.
Enquiries
Ask us about the 2-channel 4G dash camera for your fleet, or about custom camera projects. We will share pricing and availability.