The short answer
For most attendance systems, choose a reader that supports 13.56 MHz cards (Mifare or Desfire, also called NFC), stores punches offline, and sends data to software you can export from. Choose a 125 kHz-only reader only if you already own 125 kHz cards and card copying is not a concern. Choose a meter-range UHF reader only for gates where people cannot stop.
1. Card frequency: 125 kHz, 13.56 MHz or UHF
| Type | Typical use | What to know |
|---|---|---|
| 125 kHz proximity | Older door and attendance systems | Cards mostly send a fixed ID number, so they are easy to copy. Cheap, but weak security. |
| 13.56 MHz (Mifare, Desfire, NFC) | Modern attendance, access control, phones with NFC | Cards hold data and support authentication. Desfire is stronger than basic Mifare Classic. |
| UHF (in India, the 865-867 MHz band) | Gates, vehicles, long-range scanning | Detects tags from a metre or more. Needs careful placement and costs more. |
Inurum's Attendance One reads both 13.56 MHz NFC (Mifare/Desfire) and 125 kHz proximity tags, so you can keep existing 125 kHz cards while moving to 13.56 MHz.
2. Read range and speed
A card-tap reader needs the card held at the device. On our Attendance One the card should be within about 6 cm of the sensor face. That is fine for an office or a classroom door. At a factory gate or school entrance in the morning rush, a slow tap becomes a queue. Test how fast the reader beeps and logs when ten people tap in a row, not just once.
Meter-range readers solve the queue problem but cost more and can pick up tags outside the lane you intend, so check how the reader avoids double or accidental punches.
3. Card security and buddy punching
A card can be lent to a colleague. The reader cannot tell the difference. If proxy attendance is a real problem, combine cards with a fingerprint, face or palm sensor, or choose a biometric model. Also ask whether the reader can reject cloned cards. Low-frequency cards cannot offer that protection.
4. Offline storage and network
Networks fail more often than vendors admit. Ask how many punches the reader stores without a connection, and whether stored logs survive a power cut. Attendance One keeps up to 100,000 logs in an offline buffer and syncs when the connection returns. Also check how it connects (WiFi, Ethernet or PoE) so you do not discover at installation that the entrance has no power point or network cable.
5. Software, exports and integrations
The reader only captures taps. The software turns them into attendance. Ask whether the software is included, whether there is a monthly or per-user fee, whether you can export to Excel or CSV, and whether your payroll or HR system can receive the data. Attendance One syncs to the cloud through a REST API. We do not claim ready-made integrations with specific payroll products, so ask us about your system if that matters.
6. Schools versus factories versus offices
- Schools: a card-tap reader at the gate or each classroom, a plan for lost cards, and a clear way to share attendance with parents or the school system.
- Factories: many shifts and many people at once. Look at read speed, rugged mounting, offline storage and a reader per gate.
- Offices: a small number of readers, easy reports, and a way to handle visitors and part-time staff.
Before you buy: ask the vendor for the frequency supported, read distance, offline log capacity, connectivity options, software terms and warranty in one written quote. Test one device with your own cards before ordering many.
Frequently asked questions
What is the difference between 125 kHz and 13.56 MHz RFID cards?
125 kHz cards are low-frequency proximity cards that mostly just broadcast a fixed ID number. 13.56 MHz cards (such as Mifare and Desfire, and NFC) are high-frequency cards that can hold data and support authentication, so they are generally the safer choice for attendance. Inurum's Attendance One reads both 13.56 MHz NFC (Mifare/Desfire) and 125 kHz proximity tags.
How far can an RFID attendance reader read a card?
It depends on the frequency and the reader. Card-tap readers work within a few centimetres. Our Attendance One tap version expects the card within about 6 cm of the sensor face. Meter-range readers use UHF technology and detect tags from about one metre or more.
What happens to attendance records if the network goes down?
A good reader stores punches locally and sends them when the connection returns. Inurum's Attendance One keeps up to 100,000 logs in an offline buffer and syncs when the network is back. Ask every vendor how many records the device stores and whether the buffer survives a power cut.
Can I use an RFID reader for student attendance?
Yes. Schools usually choose a card-tap reader at the gate or classroom door, and check three things: how fast the reader logs a tap during the morning rush, what happens to lost cards, and how attendance data reaches the school's own software or parents.
See the Attendance One models
Tell us how many people, how many entrances and which cards you already use. We will recommend a reader. For prices, see our RFID attendance machine price guide.
See Models & Specs →Want the reader bundled with cloud software and a mobile app? See BharatAttend, our attendance software brand.